Philips Respironics BiPAP AutoSV Advanced

SKU: 1044288 Category:

This product has been discontinued.


Advanced thinking further simplifies management of complex sleep apnea.

What if you could easily and effectively treat your most complicated sleep-disordered breathing (SDB) patients?stay connected to them at home as their needs change, and improve your at-home management to positively impact long-term compliance?

BiPAP AutoSV Advanced – System One was specifically designed and validated to give you the peace of mind to not only treat patients with Complex Sleep Apnea, Central Apnea or Mixed Apnea, but the ability to manage their future needs in an effective and cost-efficient manner.

Product Features

The BiPAP AutoSV Advanced comes standard with carrying case, bag, memory card, manuals and tubing.
Digital Auto-Trak Algorithm and Bi-Flex Technology

Digital Auto-Trak Sensitivity is the brains behind Respironics’ Flex Technology. A patented algorithm monitors breathing patterns and responds to abnormal pressure changes. The Auto-Trak system measures variable triggers and cycle thresholds, then adjusts pressure automatically to provide effective sleep therapy. The Digital Auto-Trak components are always active and the system reacts to the first component that detects a change in sleep, providing maximum sensitivity.

Bi-Flex Technology allows the BiPAP AutoSV Advanced to track each breath and helps provide pressure relief during three critical points in the breathing cycle. Pressure is reduced by half centimeter increments during the transition from exhalation to inhalation, inhalation to exhalation and during exhalation. The Bi-Flex setting can be adjusted up to 1.5cm of water pressure for maximum comfort. Bi-Flex comes standard with the PR BiPAP Series and can be turned on when in Auto Bi-Level Mode (also known as Spontaneous Mode).

The BiPAP AutoSV can be set to support several modes using EPAP, IPAPmin and IPAPmax. The device can be set to deliver CPAP, CPAP with AutoSV, BiPAP and BiPAP with AutoSV. The auto-titrating algorithm allows the AutoSV to treat standard OSA symptoms as well as treating mixed apneas. The AutoSV also supports an (S/T) Mode that allows users to set the machine’s Breathe Rate and Rise Time. Setting the Breathe Rate lets the machine know how many breaths per minute the system uses to calculate when to automatically switch from exhalation to inhalation. Unlike the standard BiPAP ST, the AutoSV can automatically calculate your bpm.
Advanced Event Detection and Response

The BiPAP AutoSV Advanced is designed to identify and respond to symptoms beyond classic OSA parameters. Detection is expanded to include data on Snoring, Periodic Breathing and Respiratory Effort-Related Arousals (RERAs). The BiPAP AutoSV Advanced can monitor the breathing cycle and deliver comfortable pressures proactively for patients with complex events such as:

  • Restrictive disorders (kyphosis or fibrosis)
  • Periodic breathing such as Cheyne-Stokes Respiration (CSR)
  • Obstructed airway apnea
  • Obesity with hypo-ventilation
  • Complex SDB
  • COPD and OSA
  • Neuro-muscular disorders and SDB

RERAs differ from a hypopnea or snoring event in that a RERA shows increasing respiratory effort with each breath, culminating in a shift in brain wave activity and not necessarily a result of obstruction. Periodic breathing conditions such as Cheyne-Stokes respiration (CSR) and central apneas are distinguishable from obstructed apnea or snoring events.

The BiPAP AutoSV Advanced now comes with an Auto-titrating algorithm that allowing the device to operate like an Auto CPAP or Auto Bilevel device. Auto-titration helps address sleep-disordered breathing (SDB) such as obstructed sleep apnea and snoring. The system now recognizes patients who do not respond to pressure increases triggered by apneas or hypopneas. Whereas, other algorithms limit the treatment of apnea events above a fixed pressure level, resulting in under-treated patients. The Auto EPAP feature will automatically adjust the exhalation pressure to prevent airway collapse during an OSA event.

Advanced Back-Up Rate

Complex sleep apnea is a form of central apnea that occurs as a result of CPAP therapy. In treating such users, care must be taken not to over or under-ventilate while still allowing for natural pauses in breathing. The advanced backup rate for the BiPAP AutoSV Advanced accounts for the user’s spontaneous breathing. This system will automatically calculate the backup rate based on a natural respiratory rate.
Automatic Servo Ventilation (AutoSV) Algorithm

The AutoSV Advanced uses the SV algorithm to assure that each breath is properly ventilated. The SV algorithm monitors breathing patterns for irregularities and can quickly stabilize the breathing pattern based on a set target peak flow. Digital Auto-Track analyzes the flow signal and automatically sets the target flow on each breath cycle. If the user reaches the flow target, then the system does not offer additional pressure support.
Encore Data Management and Reporting

On-board memory has been added to the BiPAP as well as storing information on an Encore SmartCard. Use EncorePro Software to monitor therapy effectiveness through a series of reports. A new Patient Flow and Event report enables users to view a weekly breakdown on per-breath basis. Patient data is used to identify particular conditions and events with specific colors.


Product Specifications


  • Temperature: 41 deg F to 95 deg F (Operating) -4 deg F to 140 deg F (Storage)
  • Relative Humidity: 15 to 95% non-condensing (Operating and Storage)
  • Atmospheric Pressure: (5600 feet to sea level) 83 to 102kPa (Operating)


  • Dimensions: 9.75″(L) x 6.625″(W) x 4.4″(H) 24.8 cm(L) x 16.8 cm(W) x 11.2 cm(H)
  • Weight: 4 lbs (1.8 kg)


  • AC Voltage Source: 100 to 240 V, 50/60 Hz
  • DC Voltage Source: 12VDC (when operated with the external DC power adapter accessory)
  • AC Current: 1.25 A maximum
  • DC Current: 3.0 A maximum
  • Protection against electric shock: Class II
  • Degree of protection against electric shock: Type BF Applied Part
  • Modes of Operation: Continuous
  • Electromagnetic Compatibility: The device meets the requirements of EN 60601-1-2, second edition (2001)
  • Fuses: There are no user-replaceable fuses.


  • Output: 4 to 30 cm H2O
  • Sound Pressure Level: 30 dB(A)

Control Accuracy

  • Breath Rate: 4 to 30 BPM Greater than +/- 1 BPM or +/- 10% of the setting (when measured over a 4 minute period)
  • Timed Inspiration: 0.5 to 3.0 seconds +/- (0.1 +10% of the setting) seconds
  • Ramp Duration: (0-45 minutes) +/- 10% of setting
  • Rise Time: 1 to 6 (the range of values correspond to tenths of seconds) +/- 25%
  • Miscellaneous: Auto on/off, mask off alert, patient reminders

Max Exposure Heat for Machine?

  • Machine should not be exposed to heat greater than 140 degrees Fahrenheit


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.